Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
A spiral planar inductor
Posted Oct 30, 2014, 4:23 p.m. EDT Low-Frequency Electromagnetics, Geometry, Mesh Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I am a beginner in COMSOL I have chosen as a modeling tool since I devised a good opinion about him. my work is based on the modeling of a planar spiral inductor square or circular; my problem is how to translate the equations related to coil on geometric models (I'm talking about the finite element)? and how COMSOL can calculate the inductance of the coil from the geometrical parameters provided? and how to build a square spiral of 6 laps for example? becaufe the model proposed by COMSOL provides the only model proposed by himself (standard model!)?
and I thank you in advance.
Hello Yacine Guettaf
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.