Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Particles Transmission probability

Posted Nov 1, 2014, 4:23 p.m. EDT Fluid & Heat, Computational Fluid Dynamics (CFD) Version 4.3a 0 Replies

Mohamed Farid
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have faced a problem in Particle Trajectories. As when I use, in wall1, freeze wall condition, the Particles of size 0.5mm pass through the muffler until they reach the blade then stop and they do not continue moving until some of the particles reach the outlet.

And when I use Bounce wall condition, the particles transfer through the walls and that should not happen!

So kindly advice me

Thank you and Best Regards
0 Replies Last Post Nov 1, 2014, 4:23 p.m. EDT
COMSOL Moderator

Hello Mohamed Farid

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content