Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Dielectric slab transmission (Wave Optics)

Posted Nov 17, 2014, 9:37 a.m. EST Wave Optics 1 Reply

Mohammad Amin Nazirzadeh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to simulate the reflection and transmission of a simple dielectric slab (1um thick dielectric with n=1.5). Light is normally incident on the slab and the wavelength is 400nm ~ 700nm.
This is an extremely simple simulation using Lumerical FDTD, but the results in COMSOL are incorrect.
Is there anyone who knows how to simulate this?
1 Reply Last Post Nov 18, 2014, 2:06 p.m. EST
Felipe Beltran-Mejia
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago Nov 18, 2014, 2:06 p.m. EST
Mohammad,

Can you upload your model as well as the results obtained using FDTD?

cheers,
Felipe Beltran-Mejia
Mohammad, Can you upload your model as well as the results obtained using FDTD? cheers, Felipe Beltran-Mejia

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content