Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Mesh Quality

Posted May 14, 2010, 10:01 a.m. EDT 1 Reply

pieter-jan corthouts
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Does anyone know what the minimum mesh quality is that still can be imported? (eg: skewness of the triangles should be minimum 0.3)?
1 Reply Last Post May 14, 2010, 10:49 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 14, 2010, 10:49 a.m. EDT
Hi

I do not beleive one can say there is a minimum rule, COMSOL uses a minimum value to reduce the order of the elements (warnings of inverted elements).

Personally, I'm realy happy when I'm, above 3% for complex systems clearly 0.3=30% would be very nice ...

Ivar
Hi I do not beleive one can say there is a minimum rule, COMSOL uses a minimum value to reduce the order of the elements (warnings of inverted elements). Personally, I'm realy happy when I'm, above 3% for complex systems clearly 0.3=30% would be very nice ... Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content