Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to split into different domains when Importing CAD files by other softwares?
Posted Mar 30, 2015, 11:44 p.m. EDT Geometry, Modeling Tools & Definitions Version 5.0 1 Reply
Please login with a confirmed email address before reporting spam
Hi there,
I'm a new user for COMSOL Multiphysics; I was not quite familiar with the COMSOL CAD module so I used UG which I've been always using, to build models;
however here comes the question: when I import the UG model into COMSOL, it always unite all the entities in UG into one domain in COMSOL; even if I select "do not knit" in the import options, this situation still happens.
So I'm wondering are there any solutions for this issue? Or there's no way and I have to use other CAD softwares, for example SolidWorks?
Thank you and All My Regards,
Allen
I'm a new user for COMSOL Multiphysics; I was not quite familiar with the COMSOL CAD module so I used UG which I've been always using, to build models;
however here comes the question: when I import the UG model into COMSOL, it always unite all the entities in UG into one domain in COMSOL; even if I select "do not knit" in the import options, this situation still happens.
So I'm wondering are there any solutions for this issue? Or there's no way and I have to use other CAD softwares, for example SolidWorks?
Thank you and All My Regards,
Allen
1 Reply Last Post Mar 31, 2015, 9:33 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Allen,
you can use the 'Split' Operation.
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com