Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
PDE Interface in 3D with no actual domain
Posted Apr 6, 2015, 6:35 p.m. EDT Geometry, Modeling Tools & Definitions 1 Reply
Please login with a confirmed email address before reporting spam
Hi there,
I have a 3D model which contains only a 2D boundary surface. I added a PDE Boundary Interface but it is failed to compute the Jacobian.
I tried a similar example for 2D model with only 1D edge boundary and it works fine.
For sure, it would work if I solve on a 2D domain but I really need it in 3D as I want to use the membrane interface and contact pair between surfaces.
I appreciate very much if you have an answer. Thank you!!
Duy
I have a 3D model which contains only a 2D boundary surface. I added a PDE Boundary Interface but it is failed to compute the Jacobian.
I tried a similar example for 2D model with only 1D edge boundary and it works fine.
For sure, it would work if I solve on a 2D domain but I really need it in 3D as I want to use the membrane interface and contact pair between surfaces.
I appreciate very much if you have an answer. Thank you!!
Duy
Attachments:
1 Reply Last Post Apr 7, 2015, 4:41 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
This seems to be a bug from COMSOL 4.4 and it is already fixed in the version 5.0.