Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

interfacing piezoelectric device with electrical circuit

Please login with a confirmed email address before reporting spam

I have built a piezoelectric device in cylinder . how i connect a resister to the device??
i choose the terminal in piezoelectric device model.
set: terminal name= 1
terminal type = circuit
terminal name= 2
terminal type = circuit
then choose resistor in electrical circuit model..
set :
label node name
p 1
n 2
but getting error
" the DAE is structurally inconsisent
variables- 3
equations-0
error is automatically sequence generation"
plzzz help .......to solve this......

0 Replies Last Post May 5, 2015, 2:14 p.m. EDT
COMSOL Moderator

Hello Rupali Layak

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.