Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

From Matlab to Comsol

Posted May 15, 2015, 10:20 a.m. EDT Battery Design, Chemical Reaction Engineering, Geometry, Structural Mechanics Version 4.4 1 Reply

Raphaella Murta
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,
I'm trying to use Comsol with Matlab in the laboratory that I work. I have a model of geometry in matlab and I would like to export it to Comsol. this is possible?
I really appreciate any help.
Best regards,
Raphaella
1 Reply Last Post May 15, 2015, 1:14 p.m. EDT
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 10 years ago May 15, 2015, 1:14 p.m. EDT
Yes, if your license includes LiveLink for MATLAB it is possible to build a geometry in MATLAB and pass it to COMSOL. See the section entitled "Working with Geometry" in Chapter 3 of the LiveLink for MATLAB User's Guide.
Jeff
Yes, if your license includes LiveLink for MATLAB it is possible to build a geometry in MATLAB and pass it to COMSOL. See the section entitled "Working with Geometry" in Chapter 3 of the LiveLink for MATLAB User's Guide. Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content