Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to change color gradient on thermal map?

Posted May 20, 2015, 4:57 p.m. EDT Heat Transfer & Phase Change, Microfluidics, Results & Visualization Version 4.4 0 Replies

Eun Jin Cho
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I'm using the heat transfer module for microfluidics, but the size of my microfluidic channels (microns) are very small compared to the slab of PDMS (40x80mm). I need to change the white-red color gradient to a rainbow one to better differentiate temperature in the few microns that I'm interested in- how do I do this?
OR is there a way to re-do the thermal map (white to red) for the box that I select?
ALSO are there more ways to view the thermal map other than the temperature map and the isothermal contours?

Thanks in advance.
0 Replies Last Post May 20, 2015, 4:57 p.m. EDT
COMSOL Moderator

Hello Eun Jin Cho

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content