Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

boundary

Posted Jul 29, 2010, 8:26 p.m. EDT 1 Reply

Asal Bidarmaghz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

What is "Tin" as a temperature for the inlet boundary in the thermal - fluid interaction model, why dont we set the real temperature there like 283.15 K?
1 Reply Last Post Aug 1, 2010, 4:54 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Aug 1, 2010, 4:54 a.m. EDT
Hi

I do not really understand what you mean by "real temperature" and I'm not sure in which version nor in which module you are, therefore I do not know what to comment ;)

--
Good luck
Ivar
Hi I do not really understand what you mean by "real temperature" and I'm not sure in which version nor in which module you are, therefore I do not know what to comment ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content