Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
COMSOL 4.0 - Code Generation
Posted Aug 5, 2010, 4:36 p.m. EDT 1 Reply
Please login with a confirmed email address before reporting spam
I would like to compare the code that is generated from the COMSOL GUIs (say diffusion) with that generated by the PDE General From GUI.
Is there a way to view the code that in generated by COMSOL that goes to the solvers to get chewed on?
I understand how to save a model as an m-file and I am not interested in those MATLAB commands. I would like to see the actual equations that COMSOL has generated from the user's input for solving, in addition to the implementation of the boundary conditions.
Thank you for your time.
Is there a way to view the code that in generated by COMSOL that goes to the solvers to get chewed on?
I understand how to save a model as an m-file and I am not interested in those MATLAB commands. I would like to see the actual equations that COMSOL has generated from the user's input for solving, in addition to the implementation of the boundary conditions.
Thank you for your time.
1 Reply Last Post Aug 5, 2010, 4:45 p.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
You will not find everything, but many of the internal variables are sown if you look into the:
3.5a: Physics > Equation Settings
4.0a: Options > Preferences > Show Equations ON
for V4 thereafter you will get one level more on the model tree showing some of the equations.
I expect that further info, as for 3.5 equations view, will be implemented once also in V4, but only COMSOL can tell you when.
I find that their V4 evolution is converging well, a few new minor relases and it's at the level of 3.5, with many interesting new possibilities
--
Have fun Comsoling
Ivar
You will not find everything, but many of the internal variables are sown if you look into the:
3.5a: Physics > Equation Settings
4.0a: Options > Preferences > Show Equations ON
for V4 thereafter you will get one level more on the model tree showing some of the equations.
I expect that further info, as for 3.5 equations view, will be implemented once also in V4, but only COMSOL can tell you when.
I find that their V4 evolution is converging well, a few new minor relases and it's at the level of 3.5, with many interesting new possibilities
--
Have fun Comsoling
Ivar