Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Resolve error; MUMPS allocation factor increased

Posted Jun 11, 2015, 6:27 a.m. EDT Geometry, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.4 2 Replies

Syed Zaid Ali
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everyone

On running a time dependent study I get an error that "MUMPS allocation factor increased to 2.0736." I know that this error can results due to incorrect boundary conditions but I am feel that my boundary conditions are correct. Is there any other reason why the solver MUMPS, gives such an error.

Appreciate the help.

Thank you

Best regards
Zaid
2 Replies Last Post Aug 16, 2016, 3:03 a.m. EDT
COMSOL Moderator

Hello Syed Zaid Ali

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Bilal Javed Butt
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Aug 25, 2015, 11:16 a.m. EDT
Hi Ali,
I am getting same error. Did you find any solution to that error? Help is requested.

Thanks,
Bilal
Hi Ali, I am getting same error. Did you find any solution to that error? Help is requested. Thanks, Bilal
Gunasingh Amirsingh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Aug 16, 2016, 3:03 a.m. EDT
I am getting the same error as well. The MUMPS allocation factor keeps increasing but it never arrives at the output. could you solve the error ?
I am getting the same error as well. The MUMPS allocation factor keeps increasing but it never arrives at the output. could you solve the error ?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content