Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modelling pH-ISFET sensor

Posted Jun 15, 2015, 2:46 p.m. EDT Chemical Reaction Engineering, Electrochemistry Version 4.4 1 Reply

Anup Kumar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I want to model pH sensitive ISFET sensor. For this I have simulated a MOSFET (2D) and now I have to do the electrolyte part. This part would consist of an electrolyte with specified pH, an electrode/electrolyte interface and insulator/electrolyte interface. I don't know how to approach this part. Please someone help.
Thanks in advance
Anup Kumar
1 Reply Last Post Jun 17, 2015, 6:48 a.m. EDT
Anup Kumar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Jun 17, 2015, 6:48 a.m. EDT
Can someone help me model electrolyte part using the theory in the attached research paper.
Can someone help me model electrolyte part using the theory in the attached research paper.

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content