Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Evaluating the maximum in a time interval
Posted Jul 30, 2015, 4:51 a.m. EDT Fluid & Heat, Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD), Results & Visualization 1 Reply
Please login with a confirmed email address before reporting spam
Hello to everyone,
I would find trace the variation of a maximum magnitude function in interval time for a given position with COMSOL.
For example assuming that the temperature variation is sinusoidal with a period T = 1s, I would like to draw the maximum variation for each period for 40 periods.
My question is: How can I do that?
Thanks in advance!
MM
I would find trace the variation of a maximum magnitude function in interval time for a given position with COMSOL.
For example assuming that the temperature variation is sinusoidal with a period T = 1s, I would like to draw the maximum variation for each period for 40 periods.
My question is: How can I do that?
Thanks in advance!
MM
1 Reply Last Post Jul 31, 2015, 1:30 p.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
not sure I understand well your question.
There might have easier answers, but it makes me think about this blog :
www.comsol.com/blogs/using-the-previous-solution-operator-in-transient-modeling/
good luck,
Eric
There might have easier answers, but it makes me think about this blog :
www.comsol.com/blogs/using-the-previous-solution-operator-in-transient-modeling/
good luck,
Eric