Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modelling Fringe field outside of MRI machine

Posted Oct 1, 2015, 9:55 p.m. EDT Low-Frequency Electromagnetics, Geometry, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2 0 Replies

Arash Azizi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello, I am going to simulate the fringe field outside of an MRI machine. My plan is to do some measurement with real machine and make a planar plan of magnetic field on a radial plane. Then use comsol 2d axisymmetric to make 3d plan of fringe field. But, is it possible by comsol? if yes how could I import my measurements into the software? Thanks
0 Replies Last Post Oct 1, 2015, 9:55 p.m. EDT
COMSOL Moderator

Hello Arash Azizi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content