Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Thermo Mechanical Model for Friction stir welding
Posted Oct 25, 2015, 2:04 p.m. EDT Structural Mechanics Version 5.0 0 Replies
Please login with a confirmed email address before reporting spam
I am trying to couple a thermo mechanical model for simulating friction stir welding in COMSOL Multiphysics. after running i get an error like following: I am wondering that is there anybody had the same problem or can help me (segregated step 2 refers to Deformation). the simulation file is attached to this post.
Failed to find a solution.
Maximum number of segregated iterations reached.
In Segregated Step 2:
There was an error message from the linear solver.
The relative error (1e+002) is greater than the relative tolerance.
Returned solution is not converged.
Attachments:
Hello Mohammad Razzaghian
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.