Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
I wander why Boundary Heat Source in "Conjugate Heat Transfer" cannot get connected with "Electric Currents,Shell" directly?
Posted Nov 16, 2015, 8:32 a.m. EST Low-Frequency Electromagnetics, Fluid & Heat, Heat Transfer & Phase Change Version 5.2 1 Reply
Please login with a confirmed email address before reporting spam
Hi everyone,
Recently, I found some question on simulating heat distribution of heat electrode circuit surrounded by air, using Conjugate Heat Transfer(,laminar) inflow model and electric currents,Shell model, but study result shows no change to temperature.
Where, Boundary Hat Source was choosen by General source (Qb: surface losses(ecs/cucn)).
Anybody know how to deal with this situation?
Thanks!
Recently, I found some question on simulating heat distribution of heat electrode circuit surrounded by air, using Conjugate Heat Transfer(,laminar) inflow model and electric currents,Shell model, but study result shows no change to temperature.
Where, Boundary Hat Source was choosen by General source (Qb: surface losses(ecs/cucn)).
Anybody know how to deal with this situation?
Thanks!
1 Reply Last Post Nov 19, 2015, 8:17 p.m. EST
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi,
I'd like to suggest to check on the models examples first, you may refer to the website application library,
cn.comsol.com/models?q=conjugate
If you have the official license which is on subscription, you also can send your questions to support@comsol.com
Hope this can help.
Sarah
I'd like to suggest to check on the models examples first, you may refer to the website application library,
cn.comsol.com/models?q=conjugate
If you have the official license which is on subscription, you also can send your questions to support@comsol.com
Hope this can help.
Sarah