Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Adding Catalyst in Li Ion battery model

Please login with a confirmed email address before reporting spam

Hello,

I am new to comsol 4.3a and I want to add a catalyst layer around electrodes. i would like to begin with adding catalyst layer in existing tutorial model and understand the changes to begin with. What is the best method to do so?


link to Tutorial model: www.comsol.com/model/2d-lithium-ion-battery-9981

1 Reply Last Post Dec 4, 2015, 8:50 a.m. EST
Mao COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Dec 4, 2015, 8:50 a.m. EST
Dear Achyut,

COMSOL's official support database can be reached at support@comsol.com. In the meantime, if you haven't checked out this blog:
www.comsol.com/blogs/pem-fuel-cell-modeling-examples/

Hope this is helpful!

Best wishes,
Mao Mao, PhD
Dear Achyut, COMSOL's official support database can be reached at support@comsol.com. In the meantime, if you haven't checked out this blog: http://www.comsol.com/blogs/pem-fuel-cell-modeling-examples/ Hope this is helpful! Best wishes, Mao Mao, PhD

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.