Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

divide cilinder into segments

Please login with a confirmed email address before reporting spam


I have drawn a cilinder, like a tube, with walls of a certain thickness.
Now, I want to divide the cilinder into 28 segments, in circular direction (i.e. each segment has a trapezoidal shape). Is there any way to do this?
(Imagine that instead of a cilinder, I would have a round pie, and I would want to cut out 28 pieces of pie, all of equal size).

Best regards,

Machiel

1 Reply Last Post Dec 14, 2015, 8:30 a.m. EST
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Dec 14, 2015, 8:30 a.m. EST
In version 5.2, you can draw planes and partition the geometry with those planes.
In version 4.4, the partitioning capability did not exist so you would need to draw blocks and use boolean operations between those blocks and cylinder.
Best,
Jeff
In version 5.2, you can draw planes and partition the geometry with those planes. In version 4.4, the partitioning capability did not exist so you would need to draw blocks and use boolean operations between those blocks and cylinder. Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.