Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Identity pairs

Posted Oct 2, 2010, 10:15 a.m. EDT 1 Reply

Francois Guinot
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I would like to know if it is possible to define identity pairs between boundaries wich are not in contact.

Thanks a lot.
1 Reply Last Post Oct 3, 2010, 3:28 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 3, 2010, 3:28 a.m. EDT
Hi

yes in principle like Floquet boundaries in RF, or by applying yourself an projection (integration) constant, there are many examples of the latter in the doc (at lest in the 3.5 if not yet in V4 doc)

--
Good luck
Ivar
Hi yes in principle like Floquet boundaries in RF, or by applying yourself an projection (integration) constant, there are many examples of the latter in the doc (at lest in the 3.5 if not yet in V4 doc) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content