Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

COMSOL version 4.0A

Posted Oct 3, 2010, 12:24 p.m. EDT Version 4.0a 1 Reply

Anderson Silva
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

What are the differences between COMSOL 4.0 e COMSOL 4.0A? Are there important differences in Electromagnetic modeling?
1 Reply Last Post Oct 3, 2010, 1:05 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 3, 2010, 1:05 p.m. EDT
Hi

yes and you should also patch v4.0a to the version v4.0.0.993 see the main web site of COMSOL:

www.comsol.eu/support/updates/

the V4 was a major change in the way the COMSOL GUI interface is designed, and this is a very heavy job, probably only finished for all subtilities around V4.2, V4.1 is expected for next month and the conferences

--
Good luck
Ivar
Hi yes and you should also patch v4.0a to the version v4.0.0.993 see the main web site of COMSOL: http://www.comsol.eu/support/updates/ the V4 was a major change in the way the COMSOL GUI interface is designed, and this is a very heavy job, probably only finished for all subtilities around V4.2, V4.1 is expected for next month and the conferences -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content