W_can 30[cm] "Can width"
D_can 6[cm] "Can depth"
s_can 1[mm] "Can thickness"
jelly_offset 0.5[mm] "Jelly roll offset from short sides"
R_jelly (D_can-s_can*2)/4 "Radius of jellyroll half cylinders"
H_can 8[cm] "Can height"
H_foils 3[mm] "Current collector offset from can"
W_foils 6[cm] "Width of foil tab bundle"
foils_offset_x 6[cm] "Offset of foil bundle from can"
H_cc_plate 1[mm] "Current collector plate height"
cc_plate_offset_x 2[cm] "Current collector offset from can"
cc_plate_offset_y 8[mm] "Current collector offset from can"
s_spacer 1[mm] "Spacer thickness"
H_jelly H_can-s_can*2-s_spacer-H_cc_plate-H_foils "Jelly roll height"
W_cc_plate W_foils+foils_offset_x-cc_plate_offset_x "Width of current collector plate"
D_cc_plate D_can-2*(s_can+cc_plate_offset_y) "Depth of current collector plate"
R_terminal 8[mm] "Radius of terminals"
terminal_offset 4[cm] "Terminal offset from can short side"
H_terminal 2.5[mm] "Terminal height"
s_seal 1[mm] "Sealing thickness"