Technical Papers and Presentations

One of the upcoming technologies in displays is that of the electrowetting displays. A surface can be covered by a colored oil or transparent water using a voltage to increase or decrease the wettability of the surface. A simulation of the behavior of such a thin film of oil in water, ... Read More

Part of a 120mm gun has been represented as a perforated conic iron solid, surrounded by an annular screen. Inside the gun are limit conditions of isolation or thermal flux. The screen is described as a shell, receiving solar heat and exchanging with the outside atmosphere. It bears a ... Read More

Flat membrane modules are widely used to study the membrane performance at the laboratory which is influenced by pressure and velocity. Most modules designed for laboratory studies have high pressure drop and abrupt changes of flow direction what yield to lack of uniform flow and ... Read More

COMSOL\'s new CFD Module has been tested for laminar and turbulent flows in simple geometries, with couple or segregated solver. These tests allow mesh sensitivities and comparison with analytical solutions. They also give a first idea of cpu time and RAM use for standard cases. In a ... Read More

Brine disposal from desalination plants placed in inland areas far from sea is an important problem. Evaporation ponds can be used for reducing the waste to solid state but they require huge amounts of land. Evaporation using arrays of wet surfaces can minimize the land requirements. One ... Read More

Atherosclerosis is a disease that narrows, thickens, hardens and restructures a blood vessel due to substantial plaque deposit. In the Carotid Artery, the decision to treat using endarterectomy and stenting is determined by the velocity as measured by Doppler flow in the common Carotid ... Read More

We use COMSOL Multiphysics to model a gas bubble expansion in a viscous liquid initially at rest, a very common system for lightweight foamed materials from metal production and polymer processing. Modelling and simulation of foam processing during the production step involves many ... Read More

An ISFET is an ion-sensitive field effect transistor used to measure ion concentrations in a solution; when the ion concentration changes, the current through the transistor will change accordingly. Here, the solution is used as a gate electrode. A voltage between substrate and the oxide ... Read More

The rheological behaviour of a biphasic material is quite difficult to model because of the difficulties to represent the evolution of the space position of each solid particle in the solid matrix. The first part of this study consider an equivalent material by homogeneisation method. ... Read More

This study presents an approach to model the material flow around a bobbin tool for Friction Stir Welding (FSW). In this CFD model the aluminum is treated as a highly viscous non Newtonian shear thinning liquid. The model is formulated in a 3D Eulerian frame. The temperature field and ... Read More