Technical Papers and Presentations

Quick Search

Resources

White Papers and Application Notes

See How Multiphysics Simulation Is Used in Research and Development

Engineers, researchers, and scientists across industries use multiphysics simulation to research and develop innovative product designs and processes. Find inspiration in technical papers and presentations they have presented at the COMSOL Conference. Browse the selection below or use the Quick Search tool to find a specific presentation or filter by application area.

View the COMSOL Conference 2024 Collection

Search Term:

FEM Based Estimation of Biological Interaction Using a Cantilever Array Sensor

S. Logeshkumar, L. Lavanya, G. Anju, and M. Alagappan
PSG College of Technology
Coimbatore
Tamil Nadu, India

In the model silicon nanorods are designed as cantilever array and coated with thin film of aluminum or aluminum nitride, to be characterized, thus, adding a detectable mass and altering the cantilever resistance to bending. The simulated results show that when films of different ... Read More

The Application of Low Temperature Plasma in COMSOL Multiphysics

Cheng-Che (Jerry) Hsu[1]
[1]Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan

Multiphysics simulation was used in this work to model inductively coupled plasmas (ICPs). Developing a model of an ICP is challenging due to the complex relationship between the applied electric field and mixture of chemical species that develops. A preliminary model was developed and ... Read More

3-D Finite Element Modeling of Brain Edema: Initial Studies on Intracranial Pressure Using COMSOL Multiphysics^®

X.G. Li[1], H. von Holst[1][2], J. Ho[1], and S. Kleiven[1]

[1]Division of Neuronic Engineering, KTH, Stockholm, Sweden
[2]Department of Clinical Neuroscience, Karolinska Institute, Stockholm, Sweden

Brain edema is one of the most common consequences of serious traumatic brain injuries which is usually accompanied with increased Intracranial Pressure (ICP) due to water content increment. A three dimensional finite element model of brain edema is used to study intracranial pressure in ... Read More

Assessing the Potential of Ventilated Facades on Reducing a Buildings’ Thermal Load Using Decoupled COMSOL Simulations

J. van Schijndel[1], C. van Dronkelaar[1]
[1]Eindhoven University of Technology, Eindhoven, The Netherlands

Solar radiation is a prominent contributor of energy in buildings, and can be transmitted directly into a building through opaque surfaces, but it can also be absorbed by building components (i.e. walls, roofs etc.). This study discusses the use and effect of ventilated facades, with an ... Read More

Numerical Study of Droplet Formation inside a Microfluidic Flow-Focusing Device

Y. Li[1], M. Jain[1], K. Nandakumar[1]
[1]Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA, USA

The micro-nanometer sized droplets have tremendous applications in bio-diagnostics, polymerization processes etc. In this work, we numerically investigate the droplet formation process of silicone oil in aqueous solution in a MFF device. A conservative level-set method is adopted to ... Read More

Development of New Blade Profile for Vertical Axis Wind Turbine

Shuya YOSHIOKA[1]

[1]Ritsumeikan University, Kyoto, Kyoto, Japan

Vertical axis wind turbine has low rotation performance compared with that of horizontal axis wind turbine. This study proposes a new blade shape for vertical axis wind turbine effective for wide range of wind speed. Results obtained from a numerical COMSOL simulation and wind tunnel ... Read More

A Preliminary Approach to the Neutronics of the Molten Salt Reactor by Means of COMSOL Multiphysics^®

V. Memoli[1], A. Cammi[1], V. Di Marcello[1], and L. Luzzi[1]
[1]Nuclear Engineering Division, Department of Energy, Politecnico di Milano, Milano, Italy

The Molten Salt Reactor (MSR), proposed along with other five innovative concepts of fission nuclear reactor by the Generation IV International Forum (GIF-IV), represents a challenging task from the modeling perspective because of the strong coupling between neutronics and thermo ... Read More

Heat Flux Predictions for a 3-D Compost Model

M. Teutli [1], Jiménez[1], Lozano[1], Peláez[1], J. Roque[2], and I. González[3]
[1]BUAP, Puebla, Mexico
[2]Universidad Veracruzana, Xalapa, VZ, Mexico
[3]UAM, Mexico City, Mexico

A 3-D model for compost was constructed taking as geometry basis a truncated cone, with dimensions of 4 m radius and 3 m height; in this structure an energy balance is applied for a two phase system (solid-air). Compost energy processes are modeled using COMSOL with a modified heat ... Read More

An Innovative Solution for Water Bottling Using PET

D. Scardigno[1], A. Castellano[1], P. Foti[1], A. Fraddosio[1], S. Marzano[1], M.D. Piccioni[1]
[1]DICAR, Politecnico di Bari, Bari, Italy

Introduction: We study an innovative technology for water bottling using PET, aimed at reducing the thickness of the plastic bottles. The goals are the reduction of the amount of plastic used for a single water bottle, the reduction of the packaging costs and more environmental ... Read More

Some Commonly Neglected Issues Which Affect DEP Applications

G. Zhang[1], V. Pandian[1], J. Brcka[2], J. Faguet[2], E. Lee[2]
[1]Clemson University, Clemson, SC, USA
[2]TEL U.S. Holdings, Inc., U.S. Technology Development Center, Austin, TX, USA

Dielectrophoresis (or DEP) has been exploited for various micro and nano fluidics applications like patterning, sorting and separation. However, there are several commonly neglected issues in quantifying DEP forces. Such negligence could potentially lead to wrong DEP force predictions ... Read More

First

861–870 of 902

Last