Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Maximum number of Newton iterations reached FLOW BOILING

Posted Jun 22, 2016, 10:27 a.m. EDT Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD), Studies & Solvers Version 5.2 3 Replies

Deep Patel
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hii.....

I am simulating flow boiling in micro channel in COMSOL 5.2 , For that I have added Hypothetical bubble of steam(Contact angle 30 deg) in channel and water is entering at average velocity of 0.15 m/s .

For this I am using Heat transfer in fluid and Laminar two phase flow , phase field physics ,,, I have added source terms in energy equation , phase field equation and continuity equation ,

I have added study Time dependent with phase initialization and given time step 0.01 s , it is showing error of Nonlinear solver did not converge.

Maximum number of Newton iterations reached.
Time : 2.001161594232421e-006
Last time step is not converged.
What could be possible reason for error please look into it .

THANKS IN ADVANCE.
3 Replies Last Post Jun 27, 2016, 3:41 p.m. EDT
Deep Patel
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Jun 24, 2016, 2:14 a.m. EDT
Please Someone help me to solve it , I can send you COMSOL file it required.
Please Someone help me to solve it , I can send you COMSOL file it required.
Deep Patel
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Jun 27, 2016, 7:04 a.m. EDT

Deep Patel
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Jun 27, 2016, 3:41 p.m. EDT

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content