Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

convent a 2D semiconductor model to a 3D, but always error, need help

Posted Jan 21, 2011, 3:41 a.m. EST Low-Frequency Electromagnetics, Computational Fluid Dynamics (CFD), Studies & Solvers Version 4.0a, Version 4.1 1 Reply

accelerate
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I been trying to convent a standard 2D semiconductor diode model from the model library to a 3D.
However, it always shows error:
Segregated solver steps do not involve all components

headache for days!

need help.

any suggestions will be highly appreciated.

thanks

Ben
1 Reply Last Post Jul 20, 2011, 1:50 p.m. EDT
COMSOL Moderator

Hello accelerate

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

steve reed
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 20, 2011, 1:50 p.m. EDT
hi ben

did you solve this problem?

thanks

steve
hi ben did you solve this problem? thanks steve

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content