Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

tetrahedral meshing

Posted Sep 13, 2011, 5:19 a.m. EDT Geometry, Mesh Version 4.0 0 Replies

LiWah Wong
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi people

I understand that tetrahedral meshing means to be a 3D meshing, yet I am using v4.0 which seems to be allowing only boundary meshing when I chose tetrahedral meshing? I mean, under 'free tetrahedral', if I choose 'distribution', it only allows me to choose 'edges', is that normal? and also, when I choose 'all edges', it always gave me error in meshing.

anyone knows how to do a proper 3D and full volumetric meshing using v4.0?

appreciate your kindness a lot!!!

regards
Liwah
0 Replies Last Post Sep 13, 2011, 5:19 a.m. EDT
COMSOL Moderator

Hello LiWah Wong

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content