Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Photo generated carrier concentration simulation

Posted Jun 15, 2020, 9:47 a.m. EDT Semiconductor Devices Version 5.3 1 Reply

Ahasan Ullah
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Can anyone tell me the step by step process of simulating photo generated carrier concentration in a 2D silicon substrate?

1 Reply Last Post Jun 18, 2020, 11:11 a.m. EDT
Alexis Prel
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago Jun 18, 2020, 11:11 a.m. EDT

Hi Ahasan,

Have you checked this tutorial ? https://www.comsol.fr/blogs/analyzing-a-silicon-solar-cell-design-with-the-semiconductor-module

It does not have many details, but a mph is attached at the end.

Hi Ahasan, Have you checked this tutorial ? https://www.comsol.fr/blogs/analyzing-a-silicon-solar-cell-design-with-the-semiconductor-module It does not have many details, but a mph is attached at the end.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content