Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Default settings for Polar Plot Group

Posted Jun 1, 2012, 6:44 a.m. EDT Acoustics & Vibrations, Results & Visualization Version 4.2a 2 Replies

Onur Ilkorur
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

In the case of having a solution for a large number of frequencies, the polar plot group tries to calculate the polar response of every frequency by default, causing enormous amount of time due to not multi-core optimized code.

Is there a way to avoid this from happening?

Thanks in advance,
Onur
2 Replies Last Post Jun 1, 2012, 10:51 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 1, 2012, 7:39 a.m. EDT
Hi

you have in the preference a tick to turn off automatic recalculating of the plots, handy if not essential for large models

--
Good luck
Ivar
Hi you have in the preference a tick to turn off automatic recalculating of the plots, handy if not essential for large models -- Good luck Ivar
Onur Ilkorur
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 1, 2012, 10:51 a.m. EDT
Hello Ivar,

Very useful as always, thank you.

Regards,
Onur
Hello Ivar, Very useful as always, thank you. Regards, Onur

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content